View previous topic :: View next topic |
Author |
Message |
sdrenner
Joined: 08 Apr 2004 Posts: 9 Location: Indiana
|
Posted: Mon Apr 12, 2004 4:36 pm Post subject: Public network interface IP |
|
|
This displays "Reminder : needed to be configured in Windows before starting FirstSpot (This is not an error " however I have this network card configured with IP's
Here is my config.ini
;
; Description : FirstSpot Setup INF file
;
; Filename : config.ini
;
; Copyright (c) 2002-2004, PatronSoft Limited
;
; Note: use a slash to separate directories and files, those lines starting with
; a semi-colon are considered as comments.
;
; Warning : please don't change this file without supervision of a PatronSoft Engineer
; It is highly recommended that you change the FirstSpot setting in the Web-based Configuration Manager
[version]
version=Trial
versionDesc=2.1.3
[MNS]
; number of return paths
num_return_path=0
return_path0=
;
; Redirect Login Page php file
;
[loginPhp]
Login_enable0=
Login_php_Num0=
;
; Gateway Settings
;
[gateway]
; Post-Startup Batch File Path Name
batch_filePath =
; lan's subnet mask
;
subnet_mask =255.255.255.0
; domain name server IP address
;
DNS =0.0.0.0
; username
;
user =firstspot
; password
;
pass =a03af780c0f2959f26512a2cc8c2efb6
; network interface card to Internet
;
publicNIC=Local Area Connection 3
; network interface card of LAN
;
privateNIC=Local Area Connection 4
; data source for user login
;
Datasource =C:\Program Files\FirstSpot\datasource\firstspot.dsn
; datasource table for user login
;
Datasource_Tablename = fsusr
; enable session logging into the datasource log table
session_log =ON
; datasource table for user session logging
;
Datasource_Log_Tablename = fsusrlog
; datasource table for PayPal
;
Datasource_PayPal_Table=ppal
; port used by Gateway Service
;
port =5786
; port used by Authentication Server
;
auth_port =5788
; port used by ssl site
;
ssl_port =5789
; Greeting message displayed in login page
;
greeting_msg =Welcome to our Hotspot!
; Enable to show InfoBox
;
show_infobox =ON
; Login page picture (filename)
;
loginpage_pic_name=pic.jpg
; authentication server IP address
; Note: different from gateway_IP when it is not installed in gateway (not officially supported in this version)
;
auth_IP =10.20.7.1
; login page filename which dispatcher will call
;
loginpage =login_select.php
; login form filename which login_select.php will call
;
loginform =login_form.php
; anonymous login form filename which login_select.php will call
;
a_loginform =alogin_form.php
; logout form filename which logout.php will call
;
logoutform =logout_form.php
; anonymous logout form filename which logout.php will call
;
a_logoutform =alogout_form.php
; idle time (minutes) allowed for authenticated users
;
idle_timeout =10
; private network
;
private_IP =10.20.7.0
; gateway IP address
;
gateway_IP =10.20.7.1
; allow access to config manager from private network?
;
access_from_private =off
; allow access to config manager from public network?
;
access_from_public =off
; license file path
;
licensepath =C:\Program Files\FirstSpot\
; session handling mode, 0 for MAC-based, 1 for IP-based
session_handling =0
; path for dhcp config
dhcppath =C:\Program Files\FirstSpot\dhcp\dhcpservice.ini
; dhcp mode, 0 = auto, 1 = static, 2 = disabled
dhcpmode =0
; for static dhcp only, path of the Ip MAC mapping list
static_dhcp_path =C:\Program Files\FirstSpot\StaticDHCP.txt
; anonymous login
anonymous_login =OFF
; anonymous login user table name
Datasource_Anonymous_Tablename =fsa
; anonymous login log table name
Datasource_Anonymous_Log_Tablename =fsalog
; password offloading mode
pwd_offload = off
; password encryption directory path
encrypt_path =C:\Program Files\FirstSpot\dispatcher\encrypt_pwd.exe
; initial air time in minutes for self signup users
self_sign_up_credit=0
; Allowed Hosts Settings
;
[allowed hosts]
; allowed hosts keywords file path
;
hosts_keywords_path =C:\Program Files\FirstSpot\AllowedHostsKeywords.txt
; allowed hosts IPs file path
;
hosts_ips_path =C:\Program Files\FirstSpot\AllowedHostsIps.txt
; Bandwidth Throttle Settings
[bw_throttle]
; Bandwidth Throttle Mode
bt_mode =0
; Overall Upload Limit (at least 20KB/s recommended)
bt_ul_limit =0
; Overall Download Limit (at least 20KB/s recommended)
bt_dl_limit =0
; low, medium and high definition
bt_low=100
bt_medium=50
bt_high=20
[paypal]
; Business id
;
ppal_business=your_business_id@your_email.com
; URL for successful transactions
;
ppal_return=http://10.20.7.1:5788/cart.php
; URL for cancelled transactions
;
ppal_cancal_return=http://10.20.7.1:5788/cart.php
; trust "Pending"=="Complete"?
;
ppal_pending_release=no
; the settlement currency
;
ppal_base_currency=USD
; URL for notify
;
ppal_notify_url=http://fixed_ip:5789
; Starting number for invoice
;
ppal_invoice_start=1
[lang]
lang_pack_file=custom_lang.php
[misc]
show_cart=yes
block_icmp=off
block_udp=on
_debug=1
oem=C:\WINNT\INF\oem1.inf
PublicAdapterDescNme={E43D0E0E-2BC5-4762-9344-BDB48DA42B3E}
PublicAdapterIP=12.33.170.50
PublicAdapterIpMask=255.255.254.0
PrivateAdapterDescNme={C79E00F2-C2DE-4831-AFBC-B93E76A17B15}
PublicAdapterDisplayNme=3Com EtherLink XL 10/100 PCI NIC (3C905-TX) #2
PrivateAdapterDisplayNme=Intel 82558-based Integrated Ethernet with Wake on LAN* #2
PrivateMAC=009027739eb3 |
|
Back to top |
|
|
sdrenner
Joined: 08 Apr 2004 Posts: 9 Location: Indiana
|
Posted: Mon Apr 12, 2004 5:21 pm Post subject: Okay I found this past post |
|
|
As long as you have a healthy connection at the public NIC side, FirstSpot will just work fine.
"Public network interface IP ( needed to be configured in Windows )" is not a "status" message urging you to do anything extra. It's simply a static text that reminds administrators to configure the public NIC through Windows directly; instead of doing that through the Configuration Manager (which is the case for the Private NIC).
We'll consider rephrase this expression in the coming maintenace release.
So I guess it is seeing this nic just fine and I can start the service. |
|
Back to top |
|
|
kevin Forum facilitator
Joined: 26 Sep 2003 Posts: 442
|
Posted: Tue Apr 13, 2004 2:48 am Post subject: |
|
|
Thanks, sdrenner!
We will improved the wording for that. You're right, FirstSpot actually will take the ip configuration of the public interface from Windows itself; instead of requiring you to enter through the Configuration Manager.
For the PRIVATE interface, you'll have to enter ip configuration inside Configuration Manager.
~ Patronsoft Limited ~ |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
Powered by phpBB © 2001, 2005 phpBB Group
| |