firstspot and wrgt

[multinet33]

Hello

i'm a registred user (i've buyed my licence!)

I use a Linksys wrt54g wired to the pc from one of port 1-4 it is running

I want to use QoS feature of this router so I need to wired the linksys to the lan card from the INTERNET port

Do you know if it is possible ? what are the setting to do it ?

Thnaks a lot

Nicolas

[alan]

I assume this is the setup you want:

Client PC -> Linksys WRT54G -> FirstSpot

Yes, you can use the Linksys QoS, provided that you turn off NAT within your Linksys. As for FirstSpot, you need to use IP-based session handling and setup Multiple Network Segments (both available in FirstSpot Advanced Edition only)
_________________
~ Patronsoft Limited ~

[multinet]

Thanks you for your answer alan.

Then I setup another solution that I explain you here (it is working) :


Modem ADSL -> Linksys WRT54G #1 (wireless OFF just QoS feature enable for filtering P2P [deleted]) -> FirstSpot -> Linksys WRT54G #2 (Wireless ON ; used for connecting people to the hotspot) ->Client PC

Doing that I'm able to block all non desired protocols [deleted] for the price of one more WRT54G

This solution is the #1 is just a hardware firewall and the #2 is the normal access point to our custumer.

[alan]

Your setup will work. Just remind you that the WAN port is not used for Linksys WRT54G #2.

Also, you should be able to save a few bucks if you replace Linksys WRT54G #1 with any non-wireless router (with QoS) since you are not using the wireless feature anyway.
_________________
~ Patronsoft Limited ~