DHCP and Multiple Cisco 1200 APs

[mikkelsonr]

I have PatronSoft installed and working on Windows 2003 server. I have three Cisco 1300 outdoor bridges, and dhcp works through them. I have four Cisco 1200 indoor APs, and I do not get dhcp through them.

C:\Documents and Settings\Administrator>ipconfig
Windows IP Configuration
Ethernet adapter Public:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.2.0.3
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 10.2.0.1
Ethernet adapter Private:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.20.0.1
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

The Cisco 1200 APs are addressed 10.20.1.10 - 10.20.1.14.

TIA, Rolf.

[alan]

First, you need to make sure 10.20.1.10 - 10.20.1.14 is in FirstSpot DHCP Server "Excluded IP" list.

It is not clear what your topology is. Couple of things to check:

1) If there is a WAN port in your AP, it should not be used. The AP and the Private Network Interface should be in the same network segment (Except in Scenerio 3)

2) Make sure the DHCP server within the AP is turned off.
_________________
~ Patronsoft Limited ~