Access AP web config page

bruce · **Guest**

Hi,

The configuration I have is:

Hotspot NIC 10.20.7.1 -> AP 192.168.1.200

How do I access the AP's web config page, as the NIC it is connected to isn't on the same range as AP?

Regards

Bruce

alan · **Forum facilitator** Joined: 26 Sep 2003 Posts: 4435

You just need have a PC attached to the AP, and then set the IP (manually) with an IP 192.168.1.x. You should be able to access the AP now.

Now an AP strictly speaking is a level 2 device. So the IP for the AP is technically for web-based config page only.
_________________
~ Patronsoft Limited ~

miguel.rosa · Joined: 01 Dec 2004 Posts: 8

HI,
If you want you just need to login from the Firstspot portal with a valid username and password after you receive an adress from the DHCP server segment (10.20.7.0/24).
After you have access to the internet like any other client you can try to ping your AP and then open up the Web configuration from your Internet Explorer browser.