Finally Setting up, got few questions

[CyberElements]

Hey, i've been working at the final live test, before i setup the network. Going to use Topography #3. Just printed up the manual, and have some probably stupid questions.

As stated before I have a managed switch from Cisco and a Cisco 2621...that will be implimented later, but for now, just using a Standard 5port switch (Linksys) going out to the AP's (Antenna/broadcast point). there is no "wan/non wan" port just 1 port...so its obvious i plug it in there (smirk), but how do i configure it so that it gets its info from Firstspot's system? do I need to setup it as a Static IP based system? or ?? Please let me know - thanks

OH, also will be purchasing the support as soon as i can afford it (from revenu from this)

Thanks
_________________
Tim Reed
Owner
Cyber Elements WISP
Ellensburg, WA USA

[CyberElements]

I just turned off the DHCP server and BAM it got the info straight from Firstspot - i tell you what...THIS SOFTWARE ROCKS BEYOND BELIEF! Constantly impressing me!
_________________
Tim Reed
Owner
Cyber Elements WISP
Ellensburg, WA USA

[CyberElements]

Well today I got it going! even paypal works! Wanted to know if anyone out there has worked with any Cisco equipment? I have a 24port managed switch and a 2621 router w/all the bells & whistles. But no knowledge on how to use it. Can someone help? thanks
_________________
Tim Reed
Owner
Cyber Elements WISP
Ellensburg, WA USA