Passive Login

emerler · Joined: 31 May 2006 Posts: 5 Location: bolzano

I use an advanced firstspot, when i add macaddress user and check the flag passive login, the user is redirected to the login page and asked password. This is not correct i would to browse direct to internet, how i can fix this ?

alan · **Forum facilitator** Joined: 26 Sep 2003 Posts: 4435

Please check:

1) Whether the client MAC is correct. Use command ipconfig/all from the client side

2) There is no router between client PC and FirstSpot. See Scenario 1 at http://www.patronsoft.com/firstspot/topologies.html
_________________
~ Patronsoft Limited ~

emerler · Joined: 31 May 2006 Posts: 5 Location: bolzano

I set the right mac address but i redirect to the login page only with password field not username.

alan · **Forum facilitator** Joined: 26 Sep 2003 Posts: 4435

What version of FirstSpot are you using?
_________________
~ Patronsoft Limited ~

emerler · Joined: 31 May 2006 Posts: 5 Location: bolzano

4.012

alan · **Forum facilitator** Joined: 26 Sep 2003 Posts: 4435

Please post your log file firstspot_gw_srv_[timestamp].log at FirstSpot directory for further analysis. You might want to restart FirstSpot (and reproduce the problem) to make the log file smaller.

Also, what is the MAC address of your client that you use as a test?
_________________
~ Patronsoft Limited ~