SearchSearch   ProfileProfile   Log inLog in   RegisterRegister 

Firstspot config page error

 
Post new topic   Reply to topic    FirstSpot Forum Index -> Pre-sales Support Forum
View previous topic :: View next topic  
Author Message
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Fri Nov 24, 2006 2:48 pm    
Post subject: Firstspot config page error

Hi All ! I have a problam, when i'm trying to acces the firstspot configs page, it displays, PAGE CANNOT BE DISPLAYED. I noted that the apache http service is not started and when i'm trying to is not working. I also tried to re install apache.... but its giving a syntax error in a dos screen !!.... can please help me out.... URGENT ! THANKS. PLEASE SEND ON MAQUILINA@ADS.COM.MT
Back to top
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Fri Nov 24, 2006 5:12 pm    
Post subject: Firstspot config page error

Hi.... I just noted.... that when i re install first spot... it works. But when i restart the pc, I cannot access the config page any more !..... if it hepls you i can send you ip for remote desktop. thanks
Back to top
smyers1972



Joined: 10 Feb 2006
Posts: 20

PostPosted: Fri Nov 24, 2006 9:36 pm    
Post subject: try this

http://localhost:5787

Go from there, can only access it locally upon first install.
Back to top
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Sat Nov 25, 2006 11:27 am    
Post subject: cannot access config page

Hi, I tried it but did not work. .....
Back to top
hans
Forum facilitator


Joined: 14 May 2004
Posts: 63

PostPosted: Mon Nov 27, 2006 2:56 am    
Post subject:

The reason maybe related to httpd.conf setting.
You can try "net start dispatcherservice". FirstSpot will re-write httpd.conf file and then start apache.

If you still cannot start the apache then you may want to un-install and re-install FirstSpot. Since it maybe caused by installing error.
_________________
~ Patronsoft Limited ~
Back to top
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Mon Nov 27, 2006 8:16 am    
Post subject: error on config page.

when i reinstall firstspot, it works for a few minutes and i can access the config page, but than it stops working !
Back to top
hans
Forum facilitator


Joined: 14 May 2004
Posts: 63

PostPosted: Mon Nov 27, 2006 8:42 am    
Post subject:

can you post your ipconfig/all?
_________________
~ Patronsoft Limited ~
Back to top
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Mon Nov 27, 2006 1:02 pm    
Post subject: ipconfig /all

Ethernet adapter FirstSpot:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethe
rnet NIC
Physical Address. . . . . . . . . : 00-30-F1-47-7A-40
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.20.7.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 10.20.7.1

Ethernet adapter Internet:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit
Ethernet NIC
Physical Address. . . . . . . . . : 00-16-17-5D-4C-F8
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.2.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
194.158.37.211
Back to top
alan
Forum facilitator


Joined: 26 Sep 2003
Posts: 4435

PostPosted: Mon Nov 27, 2006 2:05 pm    
Post subject:

Any Apache error in Windows Event Viewer?
_________________
~ Patronsoft Limited ~
Back to top
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Mon Nov 27, 2006 3:33 pm    
Post subject: event viewer error

Yes i have an error in the event viewer, ive send you a screen shot by mail.
Back to top
hans
Forum facilitator


Joined: 14 May 2004
Posts: 63

PostPosted: Tue Nov 28, 2006 2:52 am    
Post subject:

We've received your email. The problem maybe caused by your configuration setting. Can you post your config.ini?
_________________
~ Patronsoft Limited ~
Back to top
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Tue Nov 28, 2006 6:52 am    
Post subject: config.ini

;
; Description : FirstSpot setting ini file
;
; Filename : config.ini
;

; Note: use a backslash to separate directories and files, those lines starting with
; a semi-colon are considered as comments.
;
; Warning : please don't change this file without supervision of a PatronSoft Engineer
; It is highly recommended that you change the FirstSpot setting in the Web-based Configuration Manager

[version]
version=Standard
versionDesc=4.0.12

[MNS]
; number of return paths
num_return_path=0
return_path0=

[DHCP]
leasetime=2880
num_ignored_addr=0
ignore_addr0=

[Port Filter]
flt_num=
flt_0=

[QOS]
dl=
ul=
qos_num=0
qos_0=

[Client Pass]
num_mac_addr=0
mac_0=
num_ip_addr=0
ip_0=

[proxyARP]
ip_num=0
ip_addr0=

;
; Redirect Login Page php file
;
[loginPhp]
Login_enable0=
Login_php_Num0=

;
; Gateway Settings
;
[gateway]
;Print Log Table
Datasource_Printlog=printlog

;Shared Secret Table Name
Datasource_Shared_Secret_Tablename=fssecret

;maximum timelimit per session in minutes (global), 0 = never
sessionlimit =

;URL tracking, default off
Trace_URL=0

;URL tracking interval, do not log the same url for particular user in x mins
Trace_URL_Interval=30

;URL tracking table
Datasource_URL_Log_Tablename=fsurl

;extra-information field table name
Datasource_extra_field_table = aexlog

;demo_mode=on, off (default)
;
;This demo_mode parameter is for FirstSpot channel partners demonstration purpose
;If demo_mode=on, FirstSpot DNS Server and Web Server will perform a catch-all on all
;requests. After the user login, the client will always see the "firstspotdemo" page.
demo_mode=off

;redirect user to cart.php when login fails
redirect_cart=0

;Client Isolation, NetBIOS over TCP/IP, Default is Disabled
netbios=1

;Scenario 2 (Distributed Network Topology)
scenario2=0

; Post-Startup Batch File Path Name
batch_filePath =

; lan's subnet mask (please change this through Configuration Manager only)
;
subnet_mask =255.255.255.0

; domain name server IP address
;
DNS =0.0.0.0

; domain name server IP address
;
preferred_DNS =0.0.0.0

; domain name server IP address
;
alternate_DNS =0.0.0.0

; username
;
user =ads

; password
;
pass =48a640051a5d39c0bbbbbcfd9f7a57e7

;Number of maximum administrator account
max_admin_account = 10

;Administrator username
admin_username0 =
admin_username1 =
admin_username2 =
admin_username3 =
admin_username4 =
admin_username5 =
admin_username6 =
admin_username7 =
admin_username8 =
admin_username9 =

;Administrator password
admin_password0 =
admin_password1 =
admin_password2 =
admin_password3 =
admin_password4 =
admin_password5 =
admin_password6 =
admin_password7 =
admin_password8 =
admin_password9 =

;Administrator parameter
admin_parameter0 =
admin_parameter1 =
admin_parameter2 =
admin_parameter3 =
admin_parameter4 =
admin_parameter5 =
admin_parameter6 =
admin_parameter7 =
admin_parameter8 =
admin_parameter9 =

; network interface card connected to Internet (after modify this, need to restart FirstSpot)
;
publicNIC=Internet

; network interface card connected Hotspots or visitor-based networks (after modify this, need to bind the FirstHop driver
; to this new card and unbind the FirstHop driver from ALL other cards, then reboot Windows)
;
privateNIC=FirstSpot

; data source for user login
;
Datasource =C:\Program Files\FirstSpot\datasource\firstspot.dsn

; datasource table for user login
;
Datasource_Tablename = fsusr

; datasource table for user login
Datasource_Plans_Tablename = fsplans

; enable session logging into the datasource log table
session_log =ON

; datasource table for user session logging
;
Datasource_Log_Tablename = fsusrlog

; datasource table for PayPal
;
Datasource_PayPal_Table=

; port used by Gateway Service
;
port =5786

; port used by Authentication Server
;
auth_port =5788

; port used by ssl site
;
ssl_port =0

; Greeting message displayed in login page
;
greeting_msg =Welcome to our Hotspot!

; Enable to show InfoBox
;
show_infobox =ON

; Login page picture (filename)
;
loginpage_pic_name=Wifi - Riviera.JPG

; authentication server IP address (please change this through Configuration Manager only)
; Note: different from gateway_IP when it is not installed in gateway (not officially supported in this version)
;
auth_IP =10.20.7.1

; login page filename which dispatcher will call
;
loginpage =login_select.php

; login form filename which login_select.php will call
;
loginform =login_form.php

; anonymous login form filename which login_select.php will call
;
a_loginform =alogin_form.php

; authentication form filename which authentication.php will call
;
reauthenticationform =reauth_form.php

; anonymous authentication form filename which authentication.php will call
;
a_reauthenticationform =alogout_form.php

; idle time (minutes) allowed for authenticated users
;
idle_timeout =10

; private network (please change this through Configuration Manager only)
;
private_IP =10.20.7.0

; gateway IP address (please change this through Configuration Manager only)
;
gateway_IP =10.20.7.1

; allow access to config manager from private network?
;
access_from_private =off

; allow access to config manager from public network?
;
access_from_public =off

; license file path
;
licensepath =C:\Program Files\FirstSpot\

; session handling mode, 0 for MAC-based, 1 for IP-based
session_handling =0

; path for dhcp config
dhcppath =C:\Program Files\FirstSpot\dhcp\dhcpservice.ini

; dhcp mode, 0 = auto, 1 = static, 2 = disabled
dhcpmode =0

; for static dhcp only, path of the Ip MAC mapping list
static_dhcp_path =C:\Program Files\FirstSpot\StaticDHCP.txt

; anonymous login
anonymous_login =OFF

; secret enable
secret_enable=off

; secret code
secret_code=0aed120c6f7090a5b26a4c93df382b21

; anonymous login user table name
Datasource_Anonymous_Tablename =fsa

; anonymous login log table name
Datasource_Anonymous_Log_Tablename =fsalog

; password offloading mode
pwd_offload = off

; password encryption directory path
encrypt_path =C:\Program Files\FirstSpot\dispatcher\encrypt_pwd.exe

; initial air time in minutes for self signup users
self_sign_up_credit=0

; self signup filtering
self_signup_filter=1

;allow self-signup without an ip/mac, 0=yes, 1=no
self_signup_no_mac=1

; null=no filter, 0 = signup once, >0 after x mins
self_signup_period=

;use 3 party ssl cert 0=yes 1=no
ssl_cert=1

;secure socket layer for authentication
;443 for enabled SSL, auth_port=ssl_auth_port for disabled ssl
ssl_auth_port=5788

;rewrite engine for http to https redirection
rewrite_engine=off

;NAT
nat=0

;maximum fail attempt allowed
max_attempt=

;If user accesses http://10.20.7.1:5788 directly, redirect the request to any non-existing ip,
;so that driver can capture the request properly.
;DO NOT put any unresolvable domain name here
redirect_address=http://192.168.2.10/logged_in.html

;port to handle https request in apache when user is not authenticate
redirect_port=5790

restricted_redirect=0

; Allowed Hosts Settings
;
[allowed hosts]
; allowed hosts keywords file path
;
hosts_keywords_path =C:\Program Files\FirstSpot\AllowedHostsKeywords.txt

; allowed hosts IPs file path
;
hosts_ips_path =C:\Program Files\FirstSpot\AllowedHostsIps.txt


; Bandwidth Throttle Settings
[bw_throttle]
; Bandwidth Throttle Mode
bt_mode =2

; Overall Upload Limit (at least 20KB/s recommended)
bt_ul_limit =50

; Overall Download Limit (at least 20KB/s recommended)
bt_dl_limit =50

; low, medium and high definition
bt_low=100
bt_medium=50
bt_high=20
bt_drop_period=2

[bwreset]
bwresetmethod=
bwresetperiod=
lastresetbw=

[creditcard]
payment_method=ppal

[paypal]
; Business id
;
ppal_business=

; URL for successful transactions
;
ppal_return=

; URL for cancelled transactions
;
ppal_cancel_return=

; trust "Pending"=="Complete"?
;
ppal_pending_release=no

; the settlement currency
;
ppal_base_currency=

; URL for notify
;
ppal_notify_url=

; Starting number for invoice
;
ppal_invoice_start=1

[worldpay]
; Installation id
;
wpay_instID=your_installation_ID

; the settlement currency
;
wpay_base_currency=USD

; URL for notify
;
wpay_notify_url=http://fixed_ip:5789

; Test Mode
; 100 : test mode - always successful validation
; 101 : test mode - always failed validation
; 0 : test mode - live mode, not testing
;
wpay_testmode=0

[AuthorizeNet]

;login id
aNet_id=

;transaction key
aNet_key=

aNet_hash=

aNet_base_currency=USD

; URL for notify
aNet_notify_url=http://fixed_ip

; Test Mode
; 0 : test mode - live mode, not testing
; 1 : test mode - testing only
aNet_testmode=0

[PrinterOn]

PrintSupport=0
SiteURL=
SiteUID=
SiteAuth=
; show siteURL
show_URL_login=1
show_URL_infobox=1

[lang]
; default language file
default_lang_file=lang.php
default_lang_file_attributes=English;en,en-us;iso-8859-1
; number of other language files
lang_fileNumber=0
; other luguage files
lang_file1=
lang_file1_attributes=
lang_file2=
lang_file2_attributes=
lang_file3=
lang_file3_attributes=
lang_file4=
lang_file4_attributes=
lang_file5=
lang_file5_attributes=
; show character encoding
; 0 : hide
; 1 : show
show_charset=1

lang_pack_file=custom_lang.php
cmlang_pack_file=custom_cmlang.php
last_logout=logout
this_logout=logout
last_info=infobox
this_info=infobox
last_cart=cart
this_cart=cart
key_0=
url_0=
signup01=off
signup02=off
signup03=off
signup04=off
signup05=off
signup06=off
signup07=off
signup08=off
signup09=off
signup10=off
ReqSignUp01=off
ReqSignUp02=off
ReqSignUp03=off
ReqSignUp04=off
ReqSignUp05=off
ReqSignUp06=off
ReqSignUp07=off
ReqSignUp08=off
ReqSignUp09=off
ReqSignUp10=off

; Setting of cart description
[cart]
max_slot_open=0

[radius]
use_radius=false
ServerIP=10.20.7.1
AuthPort=1812
AccPort=1813
Secret=secret
FSVendorID=2004
Datasource=C:\Program Files\FirstSpot\datasource\radius.dsn
Datasource_Tablename=fsRadius
Acc_Start=true
Acc_Stop=true
;Acc_FSLogin=true
;Acc_FSLogout=true
;Acc_FSWriteLog=true

[radiusAuthentication]
NAS_IDENTIFIER=FirstSpot
;NAS_IP_ADDRESS=the private nic ip, this can be edited.
;CALLING_STATION_ID=client nic mac or ip, depends on the Firstspot setting, this can not be edited.
;CALLED_STATION_ID=firstspot private nic mac, this can not be edited.

[radiusCustomAttribute]
;Vendor spec type for Firstspot
;fixed value can not be changed.
;
;FS_AUTH_TIMELEFT=1
;FS_AUTH_ACCUMBW=2
;FS_AUTH_BWQUOTA=3
;FS_AUTH_BWCOUNT=4
;FS_AUTH_ULLIMIT=5
;FS_AUTH_DLLIMIT=6
;FS_AUTH_LOGINTIME=7
;FS_AUTH_LOGOUTTIME=8
;FS_AUTH_TIMEDIFF=9
;FS_AUTH_BWUSAGE=10

;Account Status Type Attributes, can be changed.
;
;default ACCT_STATUS_FSLOGIN=217
;default ACCT_STATUS_FSLOGOUT=218
;default ACCT_STATUS_FSWRITELOG=219

[prepaidCard]
random_usr_prefix=usr_
random_usr_suffix_salt=abcdefghjkmnpqrstuvwxyzABCDEFGHJKMNPQRSTUVWXYZ123456789
random_usr_suffix_length=5
pwd_salt=abcdefghjkmnpqrstuvwxyzABCDEFGHJKMNPQRSTUVWXYZ123456789
pwd_length=7

[ACL]
num_acl=0

[fssmtp]
smtp = false
IspSmtpDomain=

[misc]
show_cart=yes
enable_chgpwd=1
block_icmp=off
block_udp=on
_debug=1
pkt_period=20
oem=C:\WINDOWS\INF\oem6.inf
PublicAdapterIP=192.168.2.10
PublicAdapterIpMask=255.255.255.0
PublicAdapterGateway=192.168.2.1
PrivateMAC=0030f1477a40
[DataTransfer]
bwcount_dl=0
bwcount_ul=0
Back to top
hans
Forum facilitator


Joined: 14 May 2004
Posts: 63

PostPosted: Tue Nov 28, 2006 9:43 am    
Post subject:

I guess it is a port binding problem. Can you install a clean windows again?
_________________
~ Patronsoft Limited ~
Back to top
hans
Forum facilitator


Joined: 14 May 2004
Posts: 63

PostPosted: Tue Nov 28, 2006 9:59 am    
Post subject:

by the way, I've found a problem in your config.ini. The ssl_port parameter (i.e. Credit Card port) is zero. This maybe the reason. Since apache cannot bind port zero.
_________________
~ Patronsoft Limited ~
Back to top
maquilina



Joined: 30 Sep 2006
Posts: 12
Location: malta

PostPosted: Wed Nov 29, 2006 7:26 pm    
Post subject: Problam Solved !

the problam is solved. the problam was the ssl port. thanks.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    FirstSpot Forum Index -> Pre-sales Support Forum All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group