Radius Issue

[casey]

We have purchased FirstSpot and are attempting to set it up. Currently everything is working the way we want except we are unable to get the radius working. Unfortunatly the directions are a little confusing to us so i was hoping i could get some answers to some questions here.

We currently have Radius running on another server for other reasons, wireless mainly, but we point everything through it and it talks with active directory. Are we able to just point this Firstspot server to that box, or do we have to have radius running on the firstspot machine? Under the authentication category we have selected radius but what should the server IP address be then, the Ip address of the Private network? I am not very experienced with radius, but just really trying to figure out what is suppose to be where as far as information so that we can point this to our AD and make it work.

Casey

[casey]

also there is talk of this DLL that you need to compile. We just want basic authentication with AD dont care about the rest of the info so do we still need the DLL.

Casey

[HWA]

Casey,

There's a "sticky" post in the announcement thread. Check to see if that helps or not. There is an SDK listed you might need.

[alan]

Thanks, here is the link for the sticky FAQ : http://patronsoft.com/forum/viewtopic.php?t=1175

If you just need basic login without other attributes, you don't need the DLL, see http://patronsoft.com/forum/viewtopic.php?t=1539
_________________
~ Patronsoft Limited ~