Problems with "Disconnect CLIENT"

Rudy · **Guest**

Hi,

In a Status menu
I select a Client to disconnect, and then i press Disconnect, but
the client is right there....

I press Refresh and the client is right here... why ??

alan · **Forum facilitator** Joined: 26 Sep 2003 Posts: 4435

Strange. Maybe a database issue. Have you changed your datasource?
_________________
~ Patronsoft Limited ~

Rudy · Joined: 31 Mar 2006 Posts: 2 Location: Switzerland

I need a right configuration for 2 cisco router 1005
when i will use a multiple network segment

IP:

Firstspot ethernet 10.20.7.1
Router 1 ethernet 10.20.7.2
Router 1 Serial unnumbered
Router 2 ethernet 10.20.8.1
Router 2 Serial unnumbered

thanks for your Help

alan · **Forum facilitator** Joined: 26 Sep 2003 Posts: 4435

The best source of example is Chapter 4 of firstspot_guide.pdf. Please look into that in details.

If you still need help, please post your config.ini and some detailed description on your network for further analysis.
_________________
~ Patronsoft Limited ~

Rudy · Joined: 31 Mar 2006 Posts: 2 Location: Switzerland

Hi Alan,

The problem with Router Cisco is ok, no problem more,

but i have still problem when i use anonimous access,
the Client is impossible to Disconnect... why ?

in Anonimous mode, is no need logout....

tnks

alan · **Forum facilitator** Joined: 26 Sep 2003 Posts: 4435

When anonymous option is on in the current v4, users need to wait for idle timeout to disconnect.
_________________
~ Patronsoft Limited ~