Problem with Scenario 3

[msdcorp]

We are using a version of Scenario 3. Our network is as follows:
HotSpot Server connected to an Alvarion 900 Mhz Access Point Radio which will only allow one mac address to pass through each client radio, Remote Client Alvarion radio with a Router wan port connected to the Alvarion Radio, and the LAN port of the router are connected to a 2.4Ghz Hot Spot Radio for the Wireless cleints.

The problem we are having is when the first client connects, he will get the FirstSpot login but all others clients do not get the login.
FirstSpot is using IP session handling for authentication, the router (Dlink) is setup as follows: WAN 10.20.7.20 (FirstSpot Server is: 10.20.7.1) and the LAN is: 192.168.50.1 with DHCP handing out 192.168.50.100 to 150. FirstSpot multiple network segment tab is: router IP: 192.168.50.1, Sub Net 255.255.255.0, Gateway :10.20.7.20.
We have to use a router on the long haul 900Mhz radios because each client 900Mhz radio will only allow one MAC address to pass. Any suggestions???

[alan]

Most likely the router (between client PC and FirstSpot) has NAT turned on.
_________________
~ Patronsoft Limited ~