SearchSearch   ProfileProfile   Log inLog in   RegisterRegister 

Cannot get to redirect page

 
Post new topic   Reply to topic    FirstSpot Forum Index -> Pre-sales Support Forum
View previous topic :: View next topic  
Author Message
jway



Joined: 08 Oct 2007
Posts: 4
Location: Bahamas

PostPosted: Mon Oct 08, 2007 7:53 pm    
Post subject: Cannot get to redirect page

I cannot get my installation to redirect. I can however access the redirect page by entering the URL and once logged in everything functions normally.

I have verified the disabletaskoffload is disabled.

IPconfig:

WAN
IP Address: 65.75.113.10
Subnet Mask: 255.255.255.128
Default Gateway: 65.75.113.1
DNS Servers: 24.244.137.6, 4.2.2.2

LAN
Physical Address: 00-0E-2E-23-1A-AA
IP Address: 10.50.8.1
Subnet Mask: 255.255.255.0
Default Gateway: 10.50.8.1

I have tried the LAN adsapter with and without gateway.

I have VNC on the public address. I will email password if you wish
Back to top
jway



Joined: 08 Oct 2007
Posts: 4
Location: Bahamas

PostPosted: Mon Oct 08, 2007 8:01 pm    
Post subject: Redirect

I forgot to mention that the dhcp works fine and this installation is on it's own physical segment.
Back to top
alan
Forum facilitator


Joined: 26 Sep 2003
Posts: 4435

PostPosted: Tue Oct 09, 2007 3:45 am    
Post subject:

Something wrong with your LAN (I assume it is what we called Private Network Interface) Default Gateway setting. It should be blank instead of 10.50.8.1.

Note that your shouldn't touch the Private side IP. It is configured by FirstSpot during startup.
_________________
~ Patronsoft Limited ~
Back to top
jway



Joined: 08 Oct 2007
Posts: 4
Location: Bahamas

PostPosted: Tue Oct 09, 2007 12:15 pm    
Post subject: Redirect

I have tried it as First Spot sets the the private IP with a blank gateway and then with a gateway in the private IP. Neither one works.
Back to top
alan
Forum facilitator


Joined: 26 Sep 2003
Posts: 4435

PostPosted: Wed Oct 10, 2007 4:08 am    
Post subject:

So did you add the gateway for Private Network Interface manually after FirstSpot is started? Again, you shouldn't touch the Private Network Interface IP setting. FirstSpot will handle it for you. Also, please make sure you are using FirstSpot DHCP server and there is no other DHCP server in the network.

It still looks like a Offloading problem. Please double-check your Registry DisableTaskOffload setting (check the exact spelling, the key should be under HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters). Also, try to disable offloading under your network card settings.

As a last resort, reinstall FirstSpot and use a different brand of network card as Private Network Interface.
_________________
~ Patronsoft Limited ~
Back to top
jway



Joined: 08 Oct 2007
Posts: 4
Location: Bahamas

PostPosted: Thu Oct 11, 2007 1:47 pm    
Post subject: Redirect problem solved

I reversed the binding for the NIC cards on the Private and WAN ports and that seems to have solved the issue. Even though the NIC's are the same chipset and vintage, the redirect would not work with the private network on the other NIC.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    FirstSpot Forum Index -> Pre-sales Support Forum All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group