problem with named

[shpapy]

iam running 6.0.2 and getting the following error, after this error the computer is unresponsive from the network. i have to restart him. since i got no remote display i restart using power switch so i dont know whats on the local display.

Log Name: Application
Source: Application Error
Date: 9/6/2009 5:23:59 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Mech-not-ip3
Description:
Faulting application named.exe, version 0.0.0.0, time stamp 0x488fedeb, faulting module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception code 0xc0000005, fault offset 0x00066739, process id 0x12f4, application start time 0x01ca2efa84f9ea15.
Event Xml:
<Event>
<System>
<Provider>
<EventID>1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated>
<EventRecordID>1977</EventRecordID>
<Channel>Application</Channel>
<Computer>Mech-not-ip3</Computer>
<Security>
</System>
<EventData>
<Data>named.exe</Data>
<Data>0.0.0.0</Data>
<Data>488fedeb</Data>
<Data>ntdll.dll</Data>
<Data>6.0.6002.18005</Data>
<Data>49e03821</Data>
<Data>c0000005</Data>
<Data>00066739</Data>
<Data>12f4</Data>
<Data>01ca2efa84f9ea15</Data>
</EventData>
</Event>

[shpapy]

also i get this error

Log Name: Application
Source: Application Error
Date: 9/6/2009 7:04:34 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Mech-not-ip3
Description:
Faulting application httpd.exe, version 2.2.11.0, time stamp 0x493f5d44, faulting module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception code 0xc0000008, fault offset 0x00074304, process id 0x1148, application start time 0x01ca2efa83e60915.
Event Xml:
<Event>
<System>
<Provider>
<EventID>1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated>
<EventRecordID>1978</EventRecordID>
<Channel>Application</Channel>
<Computer>Mech-not-ip3</Computer>
<Security>
</System>
<EventData>
<Data>httpd.exe</Data>
<Data>2.2.11.0</Data>
<Data>493f5d44</Data>
<Data>ntdll.dll</Data>
<Data>6.0.6002.18005</Data>
<Data>49e03821</Data>
<Data>c0000008</Data>
<Data>00074304</Data>
<Data>1148</Data>
<Data>01ca2efa83e60915</Data>
</EventData>
</Event>

[shpapy]

the error starts with this one

Log Name: Application
Source: Named
Date: 9/6/2009 4:01:24 PM
Event ID: 2
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: Mech-not-ip3
Description:
The description for Event ID 2 from source Named cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

the 'files' limit (2048) is less than FD_SETSIZE (16384), increase 'files' in named.conf or recompile with a smaller FD_SETSIZE.

Event Xml:
<Event>
<System>
<Provider>
<EventID>2</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated>
<EventRecordID>1953</EventRecordID>
<Channel>Application</Channel>
<Computer>Mech-not-ip3</Computer>
<Security>
</System>
<EventData>
<Data>the 'files' limit (2048) is less than FD_SETSIZE (16384), increase 'files' in named.conf or recompile with a smaller FD_SETSIZE.</Data>
</EventData>
</Event>