how to setup lan route for...

[multinet]

Hello,

i'm a registred standard user.

here is my network config :

DSL->FW ROUTER->PUBLIC LAN CARD->FIRSTSPOT->PRIVATE LAN CARD->WRT54G
82.xxx->192.168.1.1->192.168.1.100->FIRSTSPOT->10.20.7.1->10.20.7.200

When I want to acces the config of my WRT54G (access point for customers), i'm unable to do it if i'm on FIRSTSPOT server because adress 10.20.7.200 is unreachable.

The only way for me to access the router config is to be connected on the hotspot a a client.

Can you help me setup my route table for doing that ?

Here is my actual root table :

Itinéraires actifs :
Destination réseau Masque réseau Adr. passerelle Adr. interface Métrique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
10.20.7.0 255.255.255.0 10.20.7.1 10.20.7.1 20
10.20.7.1 255.255.255.255 127.0.0.1 127.0.0.1 20
10.255.255.255 255.255.255.255 10.20.7.1 10.20.7.1 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.1.0 255.255.255.0 192.168.1.100 192.168.1.100 20
192.168.1.100 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.1.255 255.255.255.255 192.168.1.100 192.168.1.100 20
224.0.0.0 240.0.0.0 10.20.7.1 10.20.7.1 20
224.0.0.0 240.0.0.0 192.168.1.100 192.168.1.100 20
255.255.255.255 255.255.255.255 10.20.7.1 10.20.7.1 1
255.255.255.255 255.255.255.255 192.168.1.100 192.168.1.100 1
Passerelle par défaut : 192.168.1.1
===========================================================================
Itinéraires persistants :
Aucun

Thank you for helping me

Have a good day